Advanced Air

Council Bluffs Municipal - CBF

FUEL: 100LLA

Aviation fuel is a specialized type of petroleum-based fuel used to power aircraft. It is generally of a higher quality than fuels used in less critical applications such as heating or road transport, and often contains additives to reduce the risk of icing or explosion due to high temperatures, amongst other properties.

Most aviation fuels available for aircraft are kinds of petroleum spirit used in engines with spark plugs i.e. piston engines and Wankel rotaries or fuel for jet turbine engines which is also used in diesel aircraft engines. Alcohol, alcohol mixtures and other alternative fuels may be used experimentally but are not generally available.

Avgas is sold in much lower volumes, but to many more individual aircraft, whereas Jet fuel is sold in high volumes to large aircraft operated typically by airlines, military and large corporate aircraft.


Aviation fuel is often dispensed from a tanker or bowser which is driven up to parked aircraft and helicopters. Some airports have pumps similar to filling stations that aircraft must taxi up to. Some airports also have permanent piping to parking areas for large aircraft.

Regardless of the method, aviation fuel is transferred to an aircraft via one of two methods: overwing and underwing. Overwing fuelling is used on smaller planes, helicopters, and all piston-engine aircraft. Overwing fuelling is similar to car fuelling — one or more fuel ports are opened and fuel is pumped in with a conventional pump. Underwing fuelling, also called single-point, is used on larger aircraft and for jet fuel exclusively. For single-point fuelling, a high-pressure hose is attached and fuel is pumped in at 40 PSI and a max of 45 PSI. Anything higher needs to be stopped for it can cause damage to the wings. Since there is only one attachment point, fuel distribution between tanks is either automated or it is controlled from a control panel at the fuelling point or in the cockpit. As well, a dead man's switch is used to control fuel flow.

Because of the danger of confusing the fuel types, a number of precautions are taken to distinguish between AvGas and Jet Fuel beyond clearly marking all containers, vehicles, and piping. AvGas is treated with either a red, green, or blue dye, and is dispensed from nozzles with a diameter of 40 millimetres (49 millimetres in the USA). The aperture on fuel tanks of piston-engined aircraft cannot be greater than 60 millimetres in diameter. Jet Fuel is clear to straw in colour, and is dispensed from a special nozzle called a "J spout" that has a rectangular opening larger than 60 millimetres in diameter so as not to fit into AvGas ports. However, some jet and turbine aircraft, such as some models of the Astar helicopter, have a fuelling port too small for the J spout and thus require a smaller nozzle to be installed in order to be refuelled efficiently.

This information supplied by: Wikipedia.com
http://en.wikipedia.org/wiki/Aviation_fuel

Plenty of space and always plenty of coffee!